IEC 60874-8-1990 光纤和光缆连接器.第8部分:分规范.D型光纤连接器
作者:标准资料网 时间:2024-05-21 22:28:57 浏览:8237
来源:标准资料网
【英文标准名称】:Connectorsforopticalfibresandcables;part8:sectionalspecificationforfibreopticconnector;typeD
【原文标准名称】:光纤和光缆连接器.第8部分:分规范.D型光纤连接器
【标准号】:IEC60874-8-1990
【标准状态】:作废
【国别】:
【发布日期】:
【实施或试行日期】:
【发布单位】:国际电工委员会(IX-IEC)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:
【英文主题词】:
【摘要】:
【中国标准分类号】:L23
【国际标准分类号】:
【页数】:
【正文语种】:
基本信息
标准名称: | 液压管接头用螺纹油口和柱端 填料密封柱端(A型和E型) |
英文名称: | Connections for general use and fluid power--Ports and stud ends with thread--Stud ends with elastomeric sealing(type A and type E) |
中标分类: |
机械 >>
通用零部件 >>
管路附件 |
ICS分类: |
流体系统和通用件 >>
管道部件和管道 >>
法兰、管接头及其连接件
|
替代情况: | 替代GB/T6908-1986 |
发布部门: | 中华人民共和国国家质量监督检验检疫总局 中国国家标准化管理委员会 |
发布日期: | 2005-02-21 |
实施日期: | 2005-08-01 |
首发日期: | 2005-02-21 |
作废日期: | 1900-01-01 |
主管部门: | 中国机械工业联合会 |
提出单位: | 中国机械工业联合会 |
归口单位: | 全国管路附件标准化技术委员会 |
起草单位: | 机械科学研究院、海盐管件制造有限公司、浙江海盐县精箭液压件制造厂 |
起草人: | 陈琳、李维荣、耿志学、陆建忠 |
出版社: | 中国标准出版社 |
出版日期: | 2005-08-01 |
页数: | 平装16开, 页数:11, 字数:19000 |
计划单号: | 336-080-1997 |
书号: | 155066.1-22589 |
适用范围
GB/T 19674的本部分规定了带GB/T 193螺纹和用填料密封的重载(S系列)和轻载(L系列)柱端的尺寸、性能要求和试验方法,还规定了这些柱端和填料密封的标记。符合本部分的带A型或E型密封的重载(S系列)柱端适用的最高工作压力为63MPa。符合本部分的带A型或E型密封的轻载(L系列)柱端适用的最高工作压力为25MPa。许用工作压力应根据柱端的尺寸、材料、工艺、工况、用途等来确定。
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类: 机械 通用零部件 管路附件 流体系统和通用件 管道部件和管道 法兰 管接头及其连接件
【英文标准名称】:StandardTestMethodforNon-DestructivePhotoelasticMeasurementofEdgeandSurfaceStressesinAnnealed,Heat-Strengthened,andFullyTemperedFlatGlass
【原文标准名称】:在退火、淬火和全回火平面玻璃中边缘和表面应力的无损光弹性测量的标准试验方法
【标准号】:ASTMC1279-2005
【标准状态】:现行
【国别】:
【发布日期】:2005
【实施或试行日期】:
【发布单位】:美国材料与试验协会(US-ASTM)
【起草单位】:C14.08
【标准类型】:(TestMethod)
【标准水平】:()
【中文主题词】:平面玻璃;表面应力;表面
【英文主题词】:annealedglass;heat-strengthenedglass;polariscopicexamination;stressmeasurement;temperedglass
【摘要】:Thestrengthandperformanceofheat-strengthenedandfully-temperedglassisgreatlyaffectedbythesurfaceandedgestressinducedduringtheheat-treatingprocess.TheedgeandsurfacestresslevelsarespecifiedinSpecificationC1048,intheEngineeringStandardsManual3ofGTAandinforeignspecifications.Thistestmethodoffersadirectandconvenientwaytonon-destructivelydeterminetheresidualstateofstressonthesurfaceandattheedgeofannealedandheat-treatedglass.1.1Thistestmethodcoversthedeterminationofedgestressesandsurfacestressesinannealed,heat-strengthened,andfullytemperedflatglassproducts.1.2Thistestmethodisnon-destructive.1.3Thistestmethodusestransmittedlightandis,therefore,applicabletolight-transmittingglasses.1.4Thetestmethodisnotapplicabletochemically-temperedglass.1.5Usingtheproceduredescribed,surfacestressescanbemeasuredonlyonthe"tin"sideoffloatglass.1.6Surface-stressmeasuringinstrumentsaredesignedforaspecificrangeofsurfaceindexofrefraction.1.7Thisstandarddoesnotpurporttoaddressallofthesafetyconcerns,ifany,associatedwithitsuse.Itistheresponsibilityoftheuserofthisstandardtoestablishappropriatesafetyandhealthpracticesanddeterminetheapplicabilityofregulatorylimitationspriortouse.
【中国标准分类号】:Q33
【国际标准分类号】:81_040_20
【页数】:6P.;A4
【正文语种】: